Par-Max 2,9 WPS 11 l

Trykkvannspumpe Jabsco til 3 tappesteder. Gir jevnt trykk. Trenger ikke akkumulatortank.

Spar opptil 470,- Fra:1 679,-2 099,-

- +
Vipps
Beregn fraktpris

Vennligst angi destinasjon under for å regne ut fraktkostnad.

Produktnummer: H1060006 Kategori:

The PAR-Max 2.9 Water System offers a smooth flow of up to 2.9 GPM (10.9 LPM) and is fitted with a built-in pulsation dampening bypass to control unwanted cycling and noise. We include quick-connect fittings for ease of pump installation.

Trykkvannspumpe for inntil 3 tappesteder. Gir jevnt trykk. Trenger ikke akkumulatortank.

Informasjon om produktet:

  • Koblinger: for 13mm (½”) inn og ut.
  • Dimensjoner: 230mm lang, 152mm bred, 110mm høy
  • Maks forbruk: 4.4(amps)-12V./ 2.2(amps)-24V
  • Sikring: 10 amp-12V./ 5amp-24V
  • Kapasitet: 11 liter/minutt
  • Kutter på 25-50psi trykk
  • Selvsugende opptil 2-3m
  • Kan tørrkjøres
  • Korrosjonsbestandig materialet
  • Stillegående
  • Trenger ikke akkumulator tank
  • 3 års garanti
  • Vekt: 1,8kg

Tekst fra PBO (Practical Boat Owner) sin test av trykkvanns pumper:

A bestseller, the Par Max 2.9 represents excellent value for money. The
three-chamber pump is driven by a permanent magnet motor, and
comes with a built-in bypass which is claimed to reduce the need for an
accumulator. Instead of using rubber inserts, the feet of this unit are soft
to absorb movement. It comes supplied with 300mm length of cable and
13mm push-in hose connectors or Hep2O connectors.
On test we found it performed well without an accumulator, but did
benefit from the addition of one. Performance was below average of the
pumps on test for delivery and was slightly above average for current
consumption, but equal quietest with the Flojet for noise.

Tilleggsinformasjon

Spenning

, 12V, 24V

Andre relevante produkter